THE METER OF CHOICE

Since it’s introduction, the Cadillac Magnetic Flow Meter has be acknowledged as the industry standard for Pumped condensate measurement.

Meter will consist of a full-bore body with encapsulated and rigidly retained set of coils.
Meter available with remote or integral electronics.
Meter available with local or remote indication or blind housings.
Meter available with pulse and analog (4-20 mA) outputs.
Meter will provide instantaneous and totalized flow available at local indicator or remotely through outputs.
Meter measures flow using Faraday’s law (Induce voltage is directly proportional to the velocity of the conductive liquid)
Meter K-factor is stable and not influenced by external piping or mounting orientation.
Meter will have uniform magnetic field flux distribution eliminating piping straight run and flow profiling.
Meter will measure fluids with conductivity greater than or equal to 5.0 uS/cm2
Meter fluid temperature range:
(14°F to 248°F) with integral electronics and PFA liner.
(14°F to 356°F) with remote electronics and Ceramic liner
Meter flow tube operating pressure rating: ANSI 150 or ANSI 300
Meter power supply: 100-240 VAC, 50/60 Hz or 24Vdc. Power consumption approximately 10 watts