Maintenance Kits

Meter Maintenance Kits are complete packages of all of the items that you need to rebuild a Cadillac® Condensate Meter. All of the preassembly has been done, so that the absolute minimum of time will be required at the job site. Meter maintenance kits are available for both cast iron/brass and stainless steel meters. All parts are 100% interchangable, except for casing gaskets.

Customers tell us that a typical meter rebuild using a kit takes about one hour. Add in a new electronic totalizer and maybe a new welded drum if needed, and you have the equivalent of a brand new meter ready for many years of service.

Features:
Everything is preassembled and pre-fit Authentic Cadillac® Meter specifications All parts are included:


• Bearing Assemblies
• All Gaskets
• All Fasteners
• Counter Drive Shaft with Cross Arm
• Drum Bearing Rings (E-G Kits only)
  
  
  

Kit Details:

The Cadillac® Condensate Meter Maintenance Kits contain the following parts. Where multiple parts are shown, they apply to their respective meter size as indicated by the blue letter in the part number.

Maintenance Kit Part Numbers
Cast Iron/Brass	Stainless Steel	Description
KA103	KA103-S	Size "A"
KB104	KB104-S	Size "B"
KC105	KC105-S	Size "C"
KD106	KD106-S	Size "D"
KE107	KE107-S	Size "E"
KF108	KF108-S	Size "F"
KG109	KG109-S	Size "G"

Qty.	Maintenance Kit Parts
2	Bearing Bracket Roller Assy
3	Spout Screws
14	Flange Bolts
1	Flange Gasket
1	Spout Gasket
1	Counter Drive Shaft w/ Cross Arm
1	Counter Drive Shaft Bushing
6	Counter Housing Screws
1	Counter Housing Gasket
2	Bearing Bracket Roller Assy
3	Spout Screws
*	Flange Bolts *(E-32, F-40, G-48)
*	Flange Nut *(E-32, F-40, G-48)
2	Flange Gasket
1	Spout Gasket
1	Counter End Bearing Ring
1	Spout End Bearing Ring